Страница 1 из 14 12311 ... ПоследняяПоследняя
Показано с 1 по 10 из 136

Тема: Enigma2 SifTeam Release 0.2.0

  1. #1
    Senior Member
    Регистрация
    13.12.2006
    Сообщений
    2,339

    Enigma2 SifTeam Release 0.2.0

    ENIGMA 2 for ipbox HD/cuberevo/cuberevo-mini SIFTeam
    ENIGMA 2 for ipbox HD/cuberevo/cuberevo-mini SIFTeam:

    First boot take a little bit much more than a normal boot, so wait until you can see the bandeau bar (the one with infos on current channel) on the tv screen.

    WARNING: Do not forget to change your DNS configuration (if you want to use the decoder on the net). The DNS configuration could only be made by editing manually the file "/etc/resolv.conf"

    ---------
    HISTORY:
    ---------

    release 0.2.0:
    *********************
    Bootargs are changed a little bit (simply removed the bygphysarea param), you can use the old one, or update them (doesn't matter if you update 'em or not)

    What's new:
    - support for:
    - cuberevo-mini2 (cuberevo-3000HD/ipbox 910HD)
    - cuberevo-mini (ipbox 900HD)
    - cuberevo (ipbox 9000HD rel1 and rel2)
    cuberevo-250hd (ipbox 91hd) and 200hd are not yet ready, i need more time, sorry
    - support for multple tuners:
    - dvb-s2 (samsung and new sharp tuners)
    - dvb-s
    - dvb-t
    - dvb-c
    - fix in epgcache to solve greenscreen in EPG->Similar Events
    - improved resynchronization after fast forward
    - added audio track selection for m2ts/trp/vob, after changing the audio track it might take 2-3 seconds for the sound to continue
    - tuxtxt dont crash if no swap is used
    - pictureplayer in fullscreen
    - networktest working (not yet enabled the possibility to change by menu ipaddresses)
    - added power-off function (to be tested better)
    - busybox +ip addr +nslookup
    - more exact seeking for m2ts/trp/vob on keys 1/3 4/6 7/9
    - added mkv support
    - volume up/down fix
    - added dts playback
    - support for twin tuners (to be tested better, working only live channels)
    - added seeking with 1/3 4/6 7/9 keys for some avi files
    - many HDMI related fixes
    - added m2ts and trp file extensions support in mediaplayer
    - Fixed CVBS, RGB, S-Video switching SCART mode
    - Enable choose ColorFormat for HDMI, set Component to ColorFormat YUV as default
    - added HDMI-PC custom resolutions
    - fix the pictureviewer
    - fix placing video picture on screen for Pig render. Skins with small video window now works.
    - scart set widescreen flag if wanted
    - fixed timer-bug
    - mpeg-1, mp2, 23.976 fps work
    - fixed the problem with low-bitrate streams
    - aspect fix for channels like BBC HD with resolution 1440x1080
    - mute should now work
    - added streamproxy for streaming channels via lan
    - changed webif to port 80
    - fixed webif in many parts
    - support for HD-Skins
    - support for HD-Picons
    - pyopenssl added
    - fix dvd-player
    - fixed HMDI, Scart detection
    - firstboot will be done by Wizard
    - fixed audio dropouts and video artefatcs
    - fixed many remote controller handling (all buttons should now works)
    - fixed possibility to change audio on channels by remote controller
    - SPDIF out should be fixed
    - added python bin
    - fixed hdd format
    - fixed hdparm (for hdd standby)
    - default language is fixed to English
    - added pl2303 driver (for external smart card reader)
    - updated polish language (thank's to zbigzbig and crashs)

    Consider also that any kind of mods are enabled, so everybody can do their own image, but please do not delete thanks and readme file.
    All people collaborating had worked hard, so please let's have a little respect.

    release 0.1.0(beta):
    *********************
    This is the first public release, it's released as a beta version, probably it has many and many bugs, but to fix and to discover them I need all your help, so I decided to make it public
    This version does not support:
    - card reader
    - DVB-T, DVB-C, DVB-S tuners
    - twin tuner

    Enjoy it! Tideglo

    -------------------------------------------------------------
    ABOUT ENIGMA 2 for ipbox9000/900/910/cuberevo/cuberevo-mini:
    -------------------------------------------------------------

    This is an adaption of Enigma 2 for the DGStation's High Definition boxes.

    I want to thank these people:
    Team DuckTales: for helping me on finding really many bugs and to helping me on make Enigma2 like it is now.
    zbigzbig20, crashs: for default bootlogo
    Spaeleus: for Italian translation
    SIFTeam: this is my place, with all my friends that i like really to chat with!!!! (I LOVE YOU GUYS)

    I want also to thank two special friends:
    genge: for be the best betatester of ever!!!!! (really a ball breaker but also a good friend )
    PhotosOfGhosts: for helping me on finding, studying and solving bugs

    Regards, Tideglo

    ----------------
    HOW TO INSTALL:
    ----------------

    To test this enigma2 image you need a running nfs server and a serial & network
    connection to the receiver.

    You need uboot 1.3.1 or higher to run e2 (never tested with lower versions)

    Do this only if you want to use nfs-server otherwise go to point 3:
    1. extract the tgz file on the server and set the directory in /etc/exports
    for example:
    /root/Desktop/root 192.168.1.0/255.255.255.0(rw,no_root_squash,sync,no_subtree_ch eck)

    where 192.168.1.0 is your net base-address and 255.255.255.0 is your netmask

    2. restart nfs server

    3. connect via serial console with an hyperterminal connection to the receiver (I suggest you to use putty, it's freeware, and configure it to use a 115200 serial connection)

    4. turn on the receiver and hit ctr+z in serial console
    you should see the following prompt:

    cuberevo>

    5. customize the following settings to your network environment and type them into the
    serial console:

    codice:

    setenv menu_1 'setenv ipaddr 192.168.1.5;setenv serverip 192.168.1.6;setenv gateway 192.168.1.1;setenv netmask 255.255.255.0;setenv bootargs "console=ttyAS1,115200 panic=3 root=/dev/nfs nfsroot=/root/Desktop/root rw rootpath=/root/Desktop/root ip=$ipaddr:$serverip:$gateway:$netmask mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 init=/bin/devinit";setenv bootcmd "nfs a5ff0000 192.168.1.6:/root/Desktop/root/boot/uImage;bootm a5ff0000";saveenv;boot'

    setenv menu_2 'setenv ipaddr 192.168.1.5;setenv serverip 192.168.1.6;setenv gateway 192.168.1.1;setenv netmask 255.255.255.0;setenv bootusb "run bootargsusb;usb reset;ext2load usb 0:1 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargsusb "setenv bootargs console=ttyAS1,115200 panic=3 root=/dev/sda1 rw rootdelay=10 init=/bin/devinit ip=$ipaddr:$serverip:$gateway:$netmask mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000";seten v bootcmd "run bootusb";saveenv;boot'

    setenv menu_3 'setenv ipaddr 192.168.1.5;setenv serverip 192.168.1.6;setenv gateway 192.168.1.1;setenv netmask 255.255.255.0;setenv bootusb "run bootargsusb;usb reset;ext2load usb 0:1 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargsusb "setenv bootargs console=ttyAS1,115200 panic=3 root=/dev/sdb1 rw rootdelay=10 init=/bin/devinit ip=$ipaddr:$serverip:$gateway:$netmask mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000";seten v bootcmd "run bootusb";saveenv;boot'

    setenv menu_4 'setenv ipaddr 192.168.1.5;setenv serverip 192.168.1.6;setenv gateway 192.168.1.1;setenv netmask 255.255.255.0;setenv bootargs "console=ttyAS1,115200 panic=3 root=/dev/mtdblock3 bigphysarea=1500 ip=$ipaddr:$serverip:$gateway:$netmask quiet";setenv bootcmd "bootm a0060000";saveenv;boot'

    saveenv

    remember to customize where /root/Desktop/root is the directory you added to /etc/exports and ipaddr is the ip of your decoder, serverip is the ip of your nfs-server, gateway is your gateway ip, netmask is the mask of your home-net

    6. now you can restart your decoder and press the relative remote controller's button for 5 seconds to start the image you want:

    Press Button 1: start your image using nfs-server
    Press Button 2: start your image using usb pendrive if you don't have a SATA hdd
    Press Button 3: start your image using usb pendrive if you have a SATA hdd
    Press Button 4: start your original flash image in the decoder (DGStation's original firmwares and images based on them)

    That operation is necessary only the first time you want to change your boot commands. You don't need to press all the time you reboot the decoder a button to select wich image to start, simply do that only if you want to change to e2 nfs from usb, or from original images.

    That's all, Tideglo
    http://enigma2.sifteam.eu/index.php?...fTeam%200.2.0/

  2. #2
    Senior Member
    Регистрация
    24.06.2007
    Сообщений
    845

    Re: Enigma2 SifTeam Release 0.2.0

    Вскоре будет и на IPBOX 91

  3. #3

    Re: Enigma2 SifTeam Release 0.2.0

    Ссылка не битая - только что скачал оба имеджа


  4. #4
    Senior Member
    Регистрация
    24.06.2007
    Сообщений
    845

    Re: Enigma2 SifTeam Release 0.2.0

    Цитата Сообщение от iscan_adm
    Incorrect format for file ./languages/ru.txt on line 1.
    Format is "variable name[tab]value"

    Ссылка битая (
    Убери в интернетэксплорере по умолчанию выставленый русский язык-сервис-свойства обозревателя-языки

  5. #5

    Re: Enigma2 SifTeam Release 0.2.0

    Для тех у кого не качается - залил к себе http://vadim.bn.by/IPBOX/

  6. #6
    Senior Member
    Регистрация
    24.06.2007
    Сообщений
    845

    Re: Enigma2 SifTeam Release 0.2.0

    Enigma2 SifTeam 0.2.0 mod PKT beta 3.0b

    Hi again. And again new mod of latest Sifteam E2 beta 0.2.0 image for Ipbox 9000HD from Polish Kathrein team
    This image is for USB Stick. Install like prevous "PKT MOD" You can format your Usb stick in ext2 or ext3 fs (I prefer ext3 but It's only your decission) PKT panel menu is of course under "Blue Button


    What's new:
    - based on New Sifteam Enigma 2 beta 0.2.0 (Thx Tideglo and other for great job)
    - fixed rcS for restart Gui BUG
    - added automaticly start emu after reboot/restart e2
    - on PKT Update server Updated:
    * Mbox to new version 0.21 ru5
    * My (zbigzbig20) settings for Rotor from 28.2E to 8W (soon another update)
    * Polish locale for polish users
    - and few other small fixes


    http://upek.sputnik-sat.info/download.php?id=4047

  7. #7
    Senior Member
    Регистрация
    24.06.2007
    Сообщений
    845

    Re: Enigma2 SifTeam Release 0.2.0

    Pkt panel (thread ufficiale)


    I'm using this pkt panel version on my enigma2 rev 0.2.0
    Please don't use actualization menu to upgrade pkt panel because after reboot enigma2 crash and you must reinstall all (we are waiting new version by polish friends).

    Put Fantastic folder into /usr/lib/enigma2/python/Plugins/Extensions/ and apply chmod755 for all files in this directory

    Chmod 755 also for var/bin and var/emu files.
    Restart you enigma2 and pkt panel work with blue button.
    Genge.


    Качаете сам файл отсюда/он больше 600кб-не могу у нас прикрепить/
    http://forum.sifteam.eu/ipbox-hd-eni...ufficiale.html

    А все же я ее сжал и влезла.Вот

  8. #8
    Member
    Регистрация
    26.04.2008
    Сообщений
    41

    Re: Enigma2 SifTeam Release 0.2.0

    При установке ENIGMA данные с HDD слетают или не? Заранее благодарен за ответ.

  9. #9
    Senior Member
    Регистрация
    11.06.2007
    Сообщений
    114

    Re: Enigma2 SifTeam Release 0.2.0

    Цитата Сообщение от sergey71
    При установке ENIGMA данные с HDD слетают или не? Заранее благодарен за ответ.
    Нет не слетают. Но в настройках HDD в веб интерфесе нужно выставить опцию "не изменять файловой системы при старте" . Файловая система должна быть ext2 по умолчанию стоит ext3.

  10. #10
    Junior Member
    Регистрация
    27.01.2009
    Сообщений
    15

    Re: Enigma2 SifTeam Release 0.2.0

    Там же есть прошивка для внутренней или внешней флэшки
    Залил. Работает. Сеть настроить нельзя - вываливается в ошибкой (об чем sifteam у себя и пишут, правда нифига не понятно как зайти и исправить... разве что как то по консоли через ком-порт) . Также баг - постоянно изображение идет рывками (на разных каналах по-разному, видимо зависит от битрейта канала). Еще - через некоторое время просмотра одного канала вызываю список каналов по ОК и выбираю другой канал - зависает меню, на пульт не реагирует. Помогает полные ребут. Так что пока сыро ужасно...

Страница 1 из 14 12311 ... ПоследняяПоследняя

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •