Страница 1 из 9 123 ... ПоследняяПоследняя
Показано с 1 по 10 из 87

Тема: AB Enigma1HD_9000_120609beta

  1. #1

    AB Enigma1HD_9000_120609beta

    This is Beta version of AB Enigma1HD for AB IPBox 9000HD/900HD/910HD and 91HD

    How to install:

    - unzip downloaded file to your PC
    - Copy file from your PC into USB flash memory and rename it into "usb_update.img"
    - IMPORTANT: Use "Safety remove USB device" function before disconnecting your USB flash memory from PC !
    - Turn off your receiver (Standby+OK on front panel) and connect USB memory to USB (host) connector on your receiver.
    - Press and hold Standby on front panel until "BOOTING" message appears on display,
    press Up button . "USB UPGRADE" message should appear on display of your receiver - software update performs automatically.
    - Wait until DONE message appears and restart your receiver.

    How to install E2 HD (USB stick version) via internet with E1 HD installed inside box (Multiboot function):

    - connect USB flash memory to receiver and formatt it to ext3
    - go to Menu - Setup - System settings - Harddisc setup - line "connected"and make sure if USB is mounted to /hdd or /mnt/sda (if you don´t have installed HDD) or to /mnt/sdb (if you have installed HDD)!!!
    - press blue button and go to "tarx", press OK, and choose "Download Addon". You will see "Enigma2.sda" and "Enigma2.sdb" files for each model of HD boxes.
    "Enigma2.sda" - choose only when you don´t have installed HDD
    "Enigma2.sdb"- choose only when you have installed HDD
    - after choosing correct file, download will start and after that confirmation window will appear - press OK on "yes"
    - when you will see window with "OK", you have successfully installed E2 HD on USB
    - if you want run E2 HD just turn box off (Standby+OK on front panel),that press standby button and press and hold number 2 or 3 (it depends of installed HDD)

    number 1 - booting from internal flash
    number 2 - booting from sda
    number 3 - booting from sdb
    number 4 - booting from nfs
    number9 - booting from set up enviroment ipaddr, server ip, nfsroot

    This can be helpfull:

    - IMPORTANT: By manual searching of channels ever press "retune" after inserting all parameters.
    This behavior differs from original E1, so don't forget about it when you need to do manual scan
    - In Expert setup you can find "User reset" - this returns box to first setup with basic setting for 4 satellites
    - In menu "Common Interface" you can find this: "can handle two services" - when you marked it to on, it is possible one scrambled channel record and one scrambled channel from same TP watch.
    Note: this function must be also supported by CAM module!(e.g.Cryptoworks from Mascom supports this)
    - If use 720p or 1080i mode with teletext, after teletext switch on, press Menu button and activate "true type fonts" item.

    Please note that this is E1 HD, so in IP9000HD is supported only first tuner.

    Known issues:

    - DVB-C tuners not supported
    - internal card readers don´t work (external USB card readers work)
    - works upper CI slot only, after inserting CAM module you have to restart it in menu of box. After every restarting of box you have to put out CAM from box and put in to box and reset CAM in menu of box.
    - DVB and TXT subtitles are not working
    - problem with formatting some 3,5" HDD´s
    - some bugs by playback recordings from HDD
    - it is not possible timer recording from EPG
    - SD menu graphic supported only
    - installed games don´t work in 720p and 1080i mode. (work in 576i and 576p mode)
    - signal indicators don´t work
    - in some situations box doesn´t present any channels, need reinsert CAM and reset CAM in Common Interface menu

    NOTE: Source code of AB Enigma1HD will be released ASAP. Stay tuned

    IPBox 9000 HD: http://www.nlb.to/board/index.php?pa...threadID=27586
    IPBox 910 HD: http://www.nlb.to/board/index.php?pa...threadID=27587
    IPBox 900 HD: http://www.nlb.to/board/index.php?pa...threadID=27588
    IPBox 91 HD: http://www.nlb.to/board/index.php?pa...threadID=27589

  2. #2

    Re: AB Enigma1HD_9000_120609beta

    addon с раширенной blue - panel для всех версий

  3. #3
    Junior Member

    Re: AB Enigma1HD_9000_120609beta

    А в какую папку закинуть?

  4. #4

  5. #5
    Senior Member

    Re: AB Enigma1HD_9000_120609beta

    Цитата Сообщение от Nefront
    А в какую папку закинуть?
    Как обычно в tmp
    Затем из меню ресивера жмеш синюю, красную и выбираеш инсталл из локальной папки.
    Жмеш на этом аддоне ОК, появляется слева зеленая галка и жмеш зеленую.
    Аддон инсталится и ресивер перегружается.

  6. #6
    Junior Member

    Re: AB Enigma1HD_9000_120609beta

    Ребята, дайте дельный совет.
    Не могу установить данную версию AB Enigma1HD на IP Box9000.
    После того как прошил с флэши на ресивер, "вечный" load enigma.
    Перезагружал, ждал по 20-30 минут, но конечного результата так и не дождался.
    Последняя версия прошивки AB 9000HD r9341.
    Может проблема втом, что у меня не HD телевизор?

  7. #7

    Re: AB Enigma1HD_9000_120609beta

    установил аддон,а как поставить какой нибудь эмуль?? для шарика
    у кого-то получилось??

  8. #8
    Senior Member

    Re: AB Enigma1HD_9000_120609beta

    Цитата Сообщение от Alexey43
    Может проблема втом, что у меня не HD телевизор?
    Нет, в этом не может быть проблемы.
    Попробуйте сначала установить официальную прошивку и загрузчик 1.3.3 а затем энигму1

  9. #9
    Senior Member

    Re: AB Enigma1HD_9000_120609beta

    Цитата Сообщение от edarotik
    установил аддон,а как поставить какой нибудь эмуль??
    попробуйте из блу-панели

  10. #10

    Re: AB Enigma1HD_9000_120609beta

    пожалст подробнее ,а то мне чего то не разобраться где там эмули

Страница 1 из 9 123 ... ПоследняяПоследняя

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения