Страница 1 из 4 123 ... ПоследняяПоследняя
Показано с 1 по 10 из 34

Тема: Basic Enigma for CubeCafe-s released

  1. #1
    Senior Member
    Регистрация
    13.12.2006
    Сообщений
    2,306

    Basic Enigma for CubeCafe-s released

    http://denktenk.com/enigma/cubecafe_...sic_enigma.zip

    NECESSARY WARNING
    This is BETA software, it might damage your machine and making it useless.
    In case of disaster please consider using a JTAG cable to restore bootloader.

    To re-install a standard DGS image it's necessary to flash a full serial_all.img
    type as the enigma image changes
    Boot loader, db and logo partitions
    The software is released AS-IS, there is no warranty, so in other words, install
    this at your own risk.


    Enigma 1.08 release for CubeCafe-S (codename Relook200s)

    This Enigma release is a slightly modified STANDARD enigma image build for the
    dreambox machines
    Additions include cosmetic's (dgs logo in webif, and in about box), string change
    and some minor change to reflect the cubecafe's profile

    The start sources are anyway available on cvs.tuxbox.org and must checked-out using
    the appropriate release.


    This box's mid is 20, this mid can be changed via the bootloader, or adding a key
    to the eeprom:
    The new eeprom's key are the following:

    db_key_videofmt = 160,
    db_key_mid = 161,
    db_key_cap = 162,

    all data is string type and description follows:
    videofmt can be pal or ntsc and selects the videomode in bootloader
    mid is the mid this information is read by the info module and published in dbox.sh
    cap is capability and is a rfu (reserved for future use) maybe one day will be used

    So if you want for any reason change mid please consider writing key 161 in eeprom.


    Bootloader features :

    This bootloader is very similar to the one contained in the older relook 400 image.
    It features a JPEG or MPEG2 bootlogo, mid change and video mode change.
    The JFFS support is instead maintained this time, so partition tables recorded in
    bootloader are unaltered, also if not used, this also means that it's less safer
    than the Relook400 enigma's image and has the same grade of safety you can find in
    official dgs images.

    Extra Bootloader Keys at bootup:

    Keeping pressed UP will make the video mode menu appear, this will make you select PAL or NTSC
    Keeping pressed OK will reset video mode to pal, just in case you selected ntsc on a pal system.
    Keeping pressed RIGHT key will present the MID selection menu to alter the mid.



    The Mpeg bootlogo.
    This bootloader features also the mpeg bootlogo like dbox2 and other machines.
    to enable this or alter the original bootlogo, simply do a new bootlogo like you would do
    for a dreambox or similar, save the bootlogo as mpeg with a high CBR (20000 is ok) and
    place it in the same position of the jpeg bootlogo.
    the only difference is the compression type flag:

    #define GZIPED_WEL 1
    #define JPEG_WEL 2
    #define MVI_BOOTLOGO 3

    so in the structure containing bootlogo, the compress_type must be set to 3.

    this is the 16 bytes header of the welcome partition:
    CB2FEDCC CRC
    0001247D Data Len
    00000003 Compress Type id (3 for iframe, 2 jpeg and 1 gzipped )
    00000000 backround color
    the data following is the REAL mpeg2 cbr @ 15000kbps iframe data. (the mvi or m2v file)

    The iframe bootlogo works only with this bootloader, this bootloader will also accept
    jpeg bootlogo.



    Video Format switch
    The boot loader now makes ntsc or pal without needing to have two images (one for pal
    and one for ntsc) To change video format KEEP pressed the arrow up key on the front
    panel until the menu appears.
    Arrows change selection and ok saves the choice to eeprom, the power button reboots
    without saving.
    To reset the system to PAL: poweron the box keeping pressed the OK key on the front panel,
    the video format setting will be restored to the PAL (default)

    Machine ID change
    Normally it is not possible to change the mID variable and with that the personality
    of the box.
    This boot loader will allow this, but keep in mind that it is not recommended to use a
    mID of a box that has different features and processor.
    For example, setting the mID to DM7000 or DM7020 will not make things go better as the
    cubecafe is not a DM7000 nor a 7020, it has a different hardware and different devices.
    The closest configuration to the cubecafe is the DM7000 for it's pvr's functionallity.

    There in the mID list there is also the possibility to set Relook400, Mutant200 or Relook510,
    but keep in mind that these configurations are NOT SUPPORTED in enigma and you will probably
    get the RC to not work plus more little things not supported.

    The Relook mID's are 20 for mutant, 25 for CubeCaFe and 40 for Relook400.
    The Teams that are now adapting enigma for relook can use mid 20 ,25 and mid 40 for mutant200
    CubeCaFe , and relook400.

    To access the mID changing utility, simply poweron the box and KEEP pressed the Right
    Arrow button on the front panel, the navigation in the menu is done with the arrow keys,
    ok confirms and save's and power reboots without saving.



    Memory
    Linux memory now goes from 0 to 01FFFFFF which are 32 MB of free ram to use for linux and applications,
    the swap driver then maps extra memory from A0000000 to A189FFFF for a total of 24,6 MBytes of swap
    All this makes a total of 32+24,6 = 56,6 free mem for enigma and other apps

    is not anymore needed as demux driver gained mobility.

    So this is a memory map of the new current configuration:

    00000000-01FFFFFF : linux free memory
    A0000000-A189FFFF : Free memory configured as swap

    -------STB DRIVER MEMORY--------------
    A18A0000-A18FFFFF : Stb25xx AUDIO
    A1900000-A19DFFFF : STB25xx DMX
    A19E0000-A19FFFFF : Stb25xx PVR
    A1A00000-A1DFFFFF : Stb25xx MPEG
    A1E00000-A1FFFFFF : Stb25xx VULCAN FB
    40060000-40060FFF : Stb25xx GPIO
    FEE00000-FEE00FFF : dm9000.0
    FEE00000-FEE00003 : eth0
    FEE00004-FEE00007 : eth0


    FS Image quirks/enhancements
    Good news...
    This image features a new filesystem, indeed it uses squashfs 3.1 in autolzma
    mode (this will allow to mount zlib or lmza filesystems without module recompile),
    autolzma first tries zlib, if the zlib fails then lzma is tesed, this image features
    Also kernel 2.6.17 , that with the help of a "wanting to be unnamed" person, was setup
    The new kernel needed a lot of work before it really was able to work in a stable manner,
    the team thanks the work of this person.
    *patchs respect the vanilla kernel are in this archive.

    The current kernel exposes /proc/config.gz so it's possible to reconstruct the current
    configuration to rebuid the kernel.

    Fixes:
    * Strange resolutions like 640*576 now display without the 40 pixel's black border on the left

    * Lnb diseqc switch problem is under exam and this release tries to fix multiswitch issues.

    * ReWrote the Ide Driver , it's a bit better in terms of code cleanliness.

    * Had to hack the SCI driver for slyita as the card was not recognized, please report card reader
    problems on the usual gray-yellow forum.

    Old fixes inherited from the mutant's image (drivers are basically the same)
    * Lipsync is fixed

    * Blips and lines (reason of low var space) no more of theese as now we have a big ram
    and problem appears only on low ram.

    * XwebTV now works, and does not pixellate so much as before, also streamXX programs
    were updated, tests gave positive results, this is due to a bigger buffer in demux driver.

    * Audio Dac works (new hardware has a new audiodac that does not work with old images)

    * DM9000 now uses the 2.6.17 kernel driver, and the old DM9000X driver went in retirement.

    * DMX driver now has mobility and can be relocated,resulting in a better memory managment.


    Partition Table:
    This is the current partition table, as you may notice there is a mtd9, this is the
    high ram used as swap space and necessary to make things work.

    Original (values may vary, but not the partition order).
    mtd0: 00040000 00010000 "nor.config_welcome"
    mtd1: 00140000 00010000 "nor.kernel"
    mtd2: 00420000 00010000 "nor.root"
    mtd3: 00230000 00010000 "nor.db"
    mtd4: 00030000 00010000 "nor.boot"
    mtd5: 00560000 00010000 "nor.kernel_root"
    mtd6: 00790000 00010000 "nor.kernel_root_db"
    mtd7: 007d0000 00010000 "nor.all_noboot"
    mtd8: 00800000 00010000 "nor.all"

    New partition mapping , mtd1 and mtd3 are swapped and mtd9 is added
    dev: size erasesize name
    mtd0: 00040000 00010000 "nor.config_welcome"
    mtd1: 001e0000 00010000 "nor.db"
    mtd2: 00460000 00010000 "nor.root"
    mtd3: 00150000 00010000 "nor.kernel"
    mtd4: 00030000 00010000 "nor.boot"
    mtd5: 005b0000 00010000 "nor.kernel_root"
    mtd6: 00790000 00010000 "nor.kernel_root_db"
    mtd7: 007d0000 00010000 "nor.all_noboot"
    mtd8: 00800000 00010000 "nor.all"
    mtd9: 0189ffff 00001000 "highram"



    Driver's new features and enhancements
    This image features some addons resepct the relook400 beta image.

    UHF modulator now has a driver, it was tested and works fine, enigma must be compiled to
    use it, so you must set machinetyoe to dm5620

    PIG driver. Now the pig driver really resizes the video, so playing pacman or tetris will
    allow you to continue wahtching your favorite show in a small resized window.

    Front driver was redesigned, now you can redefine every single key via ioctl, a header file
    is included for better use of the front device. The ibm drivers were written from scratch
    from the ashes of the old relook400 ones, now the negfilter ioctl is present and also pcr works,
    helping with the lipsink problem.

    Demux driver can be relocated and also offers more ram for audio and video queues, this will give
    a better recording and/or better vlc streaming.

    External Plugins now work fine and also teletext goes great.

    Known bugs..

    There may be some strange problems tuning, this is happenening on some channel , but not
    quite often

    There may be some other but that I did not find, but more or less the most bad ones are solved.

    Changes from the STANDARD Enimga image.

    General personalization for the CubeCaFe, with some addition of graphics.
    the program launcher (enigma loop) is now in flash so it can be modified to add extra
    programs, it's location is /var/etc/launch and it's called at start-up, so just modify
    that to add your programs at start-up.

    Added also libcrypto.so.0.9.7 and it's relative symbolic link to allow some programs
    that use crypto functions to work.

    enigma now exports pmt.tmp in /tmp and also the implements the camd listener for the new
    applications that require it.

    The rcS script now is more verbose during load, note that UPCL means up arrow clears
    flash (KEY UP ERASES), so you need to press it to erase and restore flash to default
    values, like the first time you flashed the image.

    writing text to the 7 segment display is simple like 123 ,
    just echo a string to the /dev/dbox/fp0 device driver.
    But keep in mind that you have only 4 characters.

    Passwords
    The password for root is relook , this is valid for telnet access, ftp acces and webif access.

    Remote Control Unit:
    Considering that the CubeCafe's rcu has more keys that the 7000 one's we
    had more luck and the keypad is similar to the original functions they had on a
    original image.

    The driver emulates the rc input of the dbox , the dreambox and the input keyboard.
    The lcd driver is not present as the relook has no lcd.


    Thanks to...
    All the people involved that gave their contribution and precious time for this project.

    Legal notice.
    Dreambox, Firecrypt are registered trademarks of Dream Multimeda, Triax is a trademark of
    Triax international.


    *Patches for the new kernel, enigma modifications and u-boot are in this archive
    For u-boot please revise logo.c for each machine as it lacks of defines
    _________________
    Re-look before you dream......

  2. #2
    Junior Member
    Регистрация
    24.03.2007
    Сообщений
    11

    Re: Basic Enigma for CubeCafe-s released

    У чехов на форуме нашел линк на Енигму для 250 от SF Team.

    http://www.satforum.cz/showthread.php?t=3149&page=4


    Вот линк на имедж
    http://rapidshare.com/files/22738909...l_20070325.img

    Сам не пробовал. Кто попробует поделитесь впечатлениями.

  3. #3
    Senior Member
    Регистрация
    30.12.2006
    Сообщений
    440

    Re: Basic Enigma for CubeCafe-s released

    Для 250-это понятно, а вот на наши 200-ки, как она после Sf-team вот интересно, ставил уже кто или нет.

    А то страшновато, как то

    Отпишитесь кто ставил, опишите как работают ЕМУ Mgcamd 1.22 (CCcam - не пользую ), шара, запись по сети, быстрота переключения между спутниками, каналами. Поддержка рус.языка, Blue- panel ...
    Ну и как стабильно работает рыбалка

  4. #4
    Senior Member
    Регистрация
    13.12.2006
    Сообщений
    2,306

    Re: Basic Enigma for CubeCafe-s released

    Цитата Сообщение от vmatv
    У чехов на форуме нашел линк на Енигму для 250 от SF Team.

    http://www.satforum.cz/showthread.php?t=3149&page=4


    Вот линк на имедж
    http://rapidshare.com/files/22738909...l_20070325.img

    Сам не пробовал. Кто попробует поделитесь впечатлениями.
    Это не имидж от SFteam

  5. #5
    Senior Member
    Регистрация
    23.01.2007
    Сообщений
    198

    Re: Basic Enigma for CubeCafe-s released

    Цитата Сообщение от vmatv
    У чехов на форуме нашел линк на Енигму для 250 от SF Team.

    http://www.satforum.cz/showthread.php?t=3149&page=4


    Вот линк на имедж
    http://rapidshare.com/files/22738909...l_20070325.img

    Сам не пробовал. Кто попробует поделитесь впечатлениями.
    Ну и не надо пробовать !
    Ниже чешский форум читал ? И кто об этом написал тоже читал ?

  6. #6
    Junior Member
    Регистрация
    24.03.2007
    Сообщений
    11

    Re: Basic Enigma for CubeCafe-s released

    Єсть енигма на сайте SF Team для 250s

    http://sfteam.anfy.cz/images.htm

    http://enigma.satupdate.net/ipbox/25...0_20070325.img

    В инфо пишут

    LZMA Patched
    IMG Size ~ 8,5MB
    FREE /var ~ 2,2MB
    -------------------------
    Linux Kernel 2.6.17
    GCC 3.2.2
    CVS 1.0.9. 25.03.2007
    WEBIF 6.02 expert
    Features
    --------------------------
    DynDNS Client
    NoIP Client
    HTTPD Web Server
    Addon Update IPKG
    Muliboot

    Inside Addons
    ---------------------------
    Teletext
    Ngrab

    All IPKG Addon downloadable direct to
    ipbox from All-In-One Plugin /Blue Button/
    ---------------------------

  7. #7
    Senior Member
    Регистрация
    23.12.2006
    Сообщений
    278

    Re: Basic Enigma for CubeCafe-s released

    Если у кого есть желание может поставить несколько образов джемини от 7000 ставили работает

  8. #8
    Member
    Регистрация
    17.03.2007
    Сообщений
    60

    Re: Basic Enigma for CubeCafe-s released

    Поставил чешский SF-имедж. Работает нормально, перевод на русский сделали хорошо, каналы переключает быстро (и на шаре тоже), диск форматнул- запись работает. После записи картинка не фрезится- показывает ровно. Звук хороший, левую-правую дорожку на канале запоминает. Намного больше понравился чем на 200-ку от 30.12.2006.

  9. #9
    Senior Member
    Регистрация
    30.12.2006
    Сообщений
    440

    Re: Basic Enigma for CubeCafe-s released

    Для 250-вон уже имиджи от Sf-team в паблике, а для нас ... о 200-ке уже забыли.

    Еще одно, ставил кто имейдж с шапки темы : "Basic Enigma for CubeCafe-s released " или нет ?

    А то сейчас засорим эту тему не теми сообщениями Тема же для 250-ки уже есть

  10. #10
    Member
    Регистрация
    17.03.2007
    Сообщений
    60

    Re: Basic Enigma for CubeCafe-s released

    Я эту базовую ставил на 250-ку. Имедж как имедж, одно слово базовый. Ничего интересного. Прикрутил к нему mgcamd, сутки на нем поработал да и поменял на SF-имедж.

Страница 1 из 4 123 ... ПоследняяПоследняя

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •