Показано с 1 по 10 из 10

Тема: Neutrino for 200s

  1. #1
    Senior Member
    Регистрация
    13.12.2006
    Сообщений
    2,331

    Neutrino for 200s

    http://denktenk.no-ip.org/200s/emu/n...200S_test1.zip

    ************************************************** ***************************
    This is my first try to get neutrino working on mutant 200S. (test1)

    UNOFFICIONAL!!!

    This is a beta image! Highly recommend to use at your own risk!!!
    This is a mixed flash image based on abcom_20071021 and Neutrino.Dream v2.03.

    Big sorry for rudream team (and abcom team) for I don't have time to change logos and some group info!

    Installation:
    $ /bin/eraseall /dev/mtd/7;cat /tmp/this_image.img > /dev/mtd/7;reboot


    Notes:
    - You don't have to set mID
    - latest drivers (sandali rulez) and kernel from abcom_20071021
    - satellites.xml and encoding.conf are updated
    - Some plugin, built-in emus and other features were deleted because of low root-mtd
    - recommend to run Key Setup to get proper mutant keymapping


    - CCcam doesn't support in Neutrino.Dream.
    workaround:
    copy CCcam to /var/bin/CCcam
    copy your CCcam.cfg and key files to ... you know
    $ touch /var/keys/.CCcam


    Please report bugs or any problem on denktenk.com
    ************************************************** ****************************
    Welcome to Neutrino.DREAM Plus!

    Neutrino.DREAM Plus v2.03/8bit-colorset
    ************************************************** ********************
    **Audioplayer**Movieplayer**PictureViewer**TS MovieBrowser**Yweb**
    **Live-veiw by web**Muiti-EPG: D+/Sky Italia/Cyfra+*EPG cash**
    **Support gotoXX/USALS commands for DisEqC 1.2 motors**
    **Bouquet editor**Virtual Zap**Zapit options menu**
    **Manual scan per frequency**Movie-cutter**
    **Flexmenu**Tuxwetter****TuxBox Commander****Tuxmail**Tuxcal**
    Lockales: deutsch, dutch, english, french, hungarian, italiano,
    lithuanian, polski, portugues, russkij.

    file: dm500_n8plus_v2.03_20070306.img
    md5sum: E64259177C976373EECF3381D58166AE

    Kernel 2.6.9
    version=2203200703060203
    comment=ruDbox dream image
    creator=ruDbox team
    credits=mixvt

    Original bootlogo by ХDreamХBoxХBustersХ/ http://www.dreambox.co.yu

    ************************************************** ********************
    Question: How to switch off RC-click beep?
    ANSWER: Main Menu/Settings/Key Setup/Key click =on/off
    ************************************************** ********************

    There is 2.03-version of Neutrino.DREAM/8bit-colorset for dm-500.
    ************************************************** ********************
    WE'RE USING Neutrino.DREAM AS BASE IMAGE ON DREAMBOX!
    FLASHING IS SAME AS DMM-IMAGE.
    NEUTRINO GUI DOES NOT SUPPORT CI-CAM.
    ************************************************** ********************
    OUR Neutrino.DREAM Plus USING SPECIAL NEW CHANNELS-FORMAT SETTINGS.
    YOU MAY TO EDIT CHANNELS-SETTINGS WITH DreamSet-EDITOR.
    DreamSet - http://mmedit9800.tripod.com.
    last update 02/01/2007 - DreamSet v2.11 or v.2.0
    Special thank to John Vossos for great support nplus-format!
    ************************************************** ********************
    THERE IS WE HAVE PRE-INSTALL FLEXMENU AND TUXWETTER.
    That Flexmen№ has a patch to ussing in Neutrino.DREAM Plus.
    The original Tuxwetter, Flexmen№ and scripts for dreambox:
    www.i-have-a-dreambox.com
    The original Tuxwetter, Flexmen№ and scripts for Dbox2:
    www.keywelt-board.com
    *Attention! Not all scripts will work by default.
    ************************************************** ********************
    WHERE ARE YOU CAN DOWNLOAD OFFICIAL(rudbox team) Neutrino.DREAM IMG:
    http://www.ump2002.net(Pilot-Alex), http://www.info-sat.org,
    http://rudbox.da.ru, http://blackbox.my1.ru
    ************************************************** ********************

    QuickNew.
    -----------
    1. Yweb v2.5.0
    http://www.yjogol.de
    2. Time-Syncronisation
    Main Menu, Settings, Network Settings, Syncronisation via - off/on
    3. EPG search incl. Lower Case/Upper Case
    Event-List/[red], [red]Evetlist current programm, [green]Search
    4. Coloured Keys(buttons) can be configured
    Main Menu, Settings, Key Setup, User menu: user menu for red/green/yellow/blue buttons
    5. Set preferred EPG language
    http://www.hyper.fi/dbox2/sectionsd/
    Main Menu, Settings, Recording, direct recording settings, Temporary timeshift - off/on
    7. Reboot added to main menu
    8. added Tuxmail
    9. added Tuxcal - Calender
    10. Some test was made on UK-cable, seems it must to working

    QuickStart.
    -----------
    1. Language Setup, Make your choice and press [Lame/Exit]
    2. Main Menu, Settings, Network Settings, Make your choice and press [red]setup network now
    3. Main Menu, Settings, Misc settings, Timezone, Make your choice
    4. Main Menu, Settings, press [red]save settings now
    5. Main Menu, Services, Zapit options, set necessary values and parameters, press [red]save settings
    ("Re-Zap on emu switch time"-parameter is recommended to put value 5 or 6!)
    6. Main Menu, Services, Servicescan, set necessary values and parameters, Scan mode: Fast!,
    press [red]save settings, start scan
    7. Main Menu, Services, Video Settings, Video system: PAL/PAL-M/NTSC
    8. Main Menu, Services, Audio Settings, English: off/on
    (auto-switch on english-soundtrack if the "English"-name is present on the channels)

    Scripts.
    -----------
    Main Menu, Scripts
    1. Backup your settings - store your personal neutrino settings to
    addon files, so next time just upload addon_restore.bin for installing all settings.
    2. Load MHW epg - Muitiepg loader/TPS/D+/Sky Italia/Cyfra+
    Before You make a start, see /var/bin/realgetepg.sh and editing it for your choice.
    Zapit to one of:
    NOT TESTED! Canal+/CanalSatellite France : Astra 19.2E / 12363 V / 27500
    NOT TESTED! Canal Digitaal : Astra 19.2E / 12515 H / 22000
    WORKING! Digital+ : Astra 19.2E / 10847 V / 22000
    WORKING! Sky Italia : Hot Bird 13E / 12418 V / 27500
    WORKING! Cyfra+ : Hot Bird 13E / 10719 V / 27500
    NOT WORKING! TPS : Hot Bird 13E / 10892 V / 27500
    3. Reset EPG
    4. NOTIMEUPDATE
    On different channels there is not an exact times. If there is a file /var/tuxbox/.notimeupdate
    and the difference of more than 10 minutes, current time does not update.
    5. Readme 1st/Image info

    Default Keys(buttons)/RC dm-70xx
    -----------
    1. [dream/menu] - Main Menu
    2. [blue] - Features
    3. [help] - channel info
    4. [help][help] - channel EPG
    5. [help][help][help] - channel EPG bigest font size
    6. [help][help][help][help] - channel EPG normal font size
    7. [info] - channel info (same as [help])
    8. [video] - TS MovieBrowser
    9. [audio] - Audioplayer
    10. [green] - Select language
    11. [red] - EPG Programm Information
    12. [tv] at tv-mode - open clock on topleft, second press - close clock
    13. [radio] at radio-mode - open clock on topleft, second press - close clock
    14. [shift]+[radio] - saving live screenshot to /hdd/screenshots/channelname_programmname_yyyymmdd_hhmmss.bmp
    (MTV2._[19E]_MTV2_S_100_TRACKS_OF_200620061231_141022.bmp)
    15. [ok] - open channels-list
    16. [ok]+[soundoff] - switch on dbv2000/channel-list mode
    17. [shift]+[blue] - switch to standby mode and lock rc
    18. [shift]+[tv] - lock scart
    18. [red]+[unlock key] - unlock rc and scart
    19. [shift]+[red] - switch on mini-mode: blocking main menu and features menu, second press - switch off
    20. [soundoff] - del files and records

    MovieBrowser special Keys(buttons)/RC dm-70xx
    -----------
    [radio] - screenshot for record-logo
    [shift]+[radio] - saving record screenshot as much as you have to press

    Neutrino Movie-cutter.
    -----------
    Trimming-editing of the records material.

    Mode-1. Set label " Movie end " for record (file).
    Starting from this label the contents of record will be cut off
    and thrown out" without of restoration.

    Mode-2. Set labels " Movie start " and " Movie end ".
    The contents of record between these two labels will be copied in a new file (record).
    The original file (record) will not be changed.

    Mode-3. Set label " jump over ".
    If such label is installed, at usual viewing record the contents inside of a label is passed - ignored.
    In our case the contents inside of a label will be written down (copied) in a new file (record).
    Such labels inside of one record it is possible to set up to 10 and then we shall receive ten new records.
    Differently the label " jump over " is a piece of record (file). Each of such pieces forms new record (file).
    The original file (record) will not be changed.

    Mode-4. Set labels " jump over ".
    "Pasting" of all pieces in one record (file). The original file (record) will not be changed.

    Arrangement of labels is carried out at viewing record in TS MovieBrowser by pressing the [blue]-button
    and a choice of necessary type of a label.

    Cutters Buttons on MovieBrowser/RC dm-70xx.
    -----------
    [video] - Mode-1.
    [audio] - Mode-2.
    [text] - Mode-3.
    [radio] - Mode-4.

    Buttons fast rewind of record/RC dm-70xx.
    -----------
    <1> - On 1 minute ago
    <4> - On 5 minutes ago
    <7> - On 10 minutes ago
    <3> - For 1 minute forward
    <6> - For 5 minutes forward
    <9> - For 10 minutes forward
    <2> - In the beginning of record
    <5> - In the middle of record
    <8> - In the end of record
    PgUp - for 10 seconds forward
    PgDown - on 10 seconds ago

    EPG Cash.
    -----------
    Settings->Misc settings->-------Epg settings-------
    Be carefull with "Dir for epg cash"!!!
    There is must be freespace on hdd or your mount-partion/directory named as /hdd/, /mnt/, /media/, /tmp/.
    Example: /hdd/epg, /mnt/your_dir/epg, /media/your_dir .

    Live-veiw from dreambox-web.
    -----------
    Before to start Live-veiw from dreambox-web:
    install VLC http://downloads.videolan.org/pub/vi....8.x-win32.exe

    Default cardserver and emu.
    -----------
    Newcs is default cardserver, mgcamd - emu.
    ************************************************** ********************
    Question: How to activate mgcamd and newcs?
    ANSWER: Cardserver newcs mustbe to activate/restart at first!
    ANSWER: Main Menu/Addons/Cardserver: no->newcs /Restart cardsever
    ANSWER: Main Menu/Addons/Camd: no->mgcamd /Restart camd
    ************************************************** ********************
    Question: How to install camd3 or @box?
    ANSWER: camd3 mustbe to added /var/emu as - camd3, pcamd to /var/bin as pcamd, othere files to /var/keys
    ANSWER: @box mustbe to added /var/emu as - @box or camdd, othere files to /var/keys
    Question: How to activate camd3 or @box?
    ANSWER: Cardserver newcs mustbe deactivate at first!
    ANSWER: Main Menu/Addons/Cardserver: newcs->no /Restart cardsever
    ANSWER: Main Menu/Addons/Camd: no->mgcamd->...camd3 /Restart camd
    ANSWER: Main Menu/Addons/Camd: no->mgcamd->...@box(or daemon) /Restart camd
    ************************************************** ********************
    Please, remember that
    "Re-Zap on emu switch time"-parameter is recommended to put value 5 or 6!
    See QuickStart.
    You can start recording the crypt-channel and...
    and zap to next crypt-channel and to look it or to zap next and next, etc.
    JUST SWITCH EMU TO MGCAMD AND START YOU RECORD/VIEWING!
    Mgcamd mustbe present in image inside.

    VNCviewer.
    -----------
    You can access your handheld desktop simultaneously from dreambox
    over a network connection. RealVNC (http: // www.realvnc.com/) or
    TightVNC (http: // www.tightvnc.com/) can be used as a server.
    You must create config file, /var/tuxbox/config/vnc.conf

    server=10.0.0.2
    port=5900
    passwd=test
    scale=1

    10.0.0.2 IP of VNC server, 5900 port of server, test - password,
    1 - size per screen

    More info - http://wiki.tuxbox.org/Plugins:VNCviewer


    How to get updates and addons.
    -----------
    At first, dreambox must has internet-connection!
    1. Main Menu, Service, Software Update, Updatemode: internet
    2. search for new version...

    How to install addons manual.
    -----------
    At first, our neutrino's addons is not same as enigma's addons!
    1. Put addon-file(addon_name.bin) to /tmp
    1. Main Menu, Service, Software Update, Updatemode: manual(ftp)
    2. search for new version...
    3. Filebrowser /tmp/, press to addon-file(addon_name.bin)
    4. follow instruction

    We have nothing against modifications to our Neutrino
    images, if you follow our small conditions, namely:
    1. The original Readme files must remain in archives with
    your mod image.
    The same counts to all readme and info files within the image.

    How can you check who is original creator of the image?
    There is information in file called ".version" in root
    directory of every image.
    Please, leave it also unchanged.

    2. NO KEYS/RSA/ROM files within your renamed - modified image.
    3. We are glad, NAME of our team(ruDbox) in file names of your
    archives and mod image independently to see,
    e.g. - ruDbox **** _mod_your_name or your_name_mod_ruDbox ***.

    That's all.
    Certainly you cannot follow our requirements and continue
    everything like it is.
    Believe, however, that attention of our friends who use
    our private images is enough for us.

    ruDbox Team
    #dbox2 /Dalnet

  2. #2
    Senior Member
    Регистрация
    13.12.2006
    Сообщений
    2,331

    Re: Neutrino for 200s

    Появилась и версия для заливки через серийный порт
    прошивка типа - serial_all
    http://denktenk.no-ip.org/200s/emu/n...st1_serial.zip

    ************************************************** ***************************
    This is my first try to get neutrino working on mutant 200S. (test1)

    UNOFFICIONAL!!!

    This is a beta image! Highly recommend to use at your own risk!!!
    This is a mixed flash image based on abcom_20071021 and Neutrino.Dream v2.03.

    Big sorry for rudream team (and abcom team) for I don't have time to change logos and some group info!

    Notes:
    - You don't have to set mID
    - latest drivers (sandali rulez) and kernel from abcom_20071021
    - satellites.xml and encoding.conf are updated
    - Some plugin, built-in emus and other features were deleted because of low root-mtd
    - recommend to run Key Setup to get proper mutant keymapping
    - CCcam doesn't support in Neutrino.Dream.
    workaround:
    copy CCcam to /var/bin/CCcam
    copy your CCcam.cfg and key files to ... you know
    $ touch /var/keys/.CCcam

    Warning: First boot is long (~2mins) because of the jffs2 format.


    Please report bugs or any problem on denktenk.com
    ************************************************** ****************************

  3. #3
    Senior Member
    Регистрация
    12.01.2007
    Сообщений
    126

    Re: Neutrino for 200s

    Сейчас поставлю проверю потом налишу что из этого вышло.

  4. #4
    Junior Member
    Регистрация
    25.01.2007
    Сообщений
    26

    Re: Neutrino for 200s

    Цитата Сообщение от Anatoli
    Сейчас поставлю проверю потом налишу что из этого вышло.
    Ну и как впечатление?

  5. #5
    Senior Member
    Регистрация
    12.01.2007
    Сообщений
    126

    Re: Neutrino for 200s

    Не фантан поигрался и перешел опять на на Набило 3 раза у меня слетала устонавлевается нормально спутники нашел просканировал с Русский язык есть часавой пояс ставится как то через ж.... както не привычно эму нет надо ставить вручную ну это не проблема меню и настройки как то не привычно после Энигмы надо привыкать что понравилось что на пульте любую кнопку можно запрогромировать самому как хочеш а болезнь у нее как только зделаеш reboot сразу виснет намертво лечится только прошивать по новой вот я 3 раза и перегрузил и 3 раза слетела Что то руки чешутся пошел по четвертому разу пока не перегружаеш все работает поставил Mgcamd1.27 ау проходит, шара тоже идет нормально только редактировать каналы как то геморойно на Энигме редактировать быстрей может привычка Два дня работает нормально без приключений да минусы у нее если сравнивать с Энигмой нет скинов стоит один родной можно только самому менять цветность и размер шрифта это радует пока все .

  6. #6
    Junior Member
    Регистрация
    26.12.2006
    Сообщений
    19

    Re: Neutrino for 200s

    У меня глюка с перешиванием после перезагрузки не наблюдается, есть только глючок
    с режимами выключения. Правильно отрабатывает только вариант глубокого шатдауна
    через [menu]->[выключить]. При попытке [menu]->[reboot] тоже просто уходит в шатдаун.
    При нажатии просто кнопки выключения на пульте вместо дежурного режима выключается
    и зависает, помогает только рестарт путём выдёргивания из розетки.
    Но это-то ладно, главная проблема в другом. Эмулятор, а именно mgcamd. Куда его надо
    положить и что дополнительно сделать, чтобы он при включении стартовал автоматом?
    У меня всё открывается, и через шаринг и ключами, но стартовать приходится в телнете,
    ручками, а это есть зер шлехт Не подскажете ли, просто может чего не так делаю?

  7. #7
    Member
    Регистрация
    20.12.2006
    Сообщений
    62

    Re: Neutrino for 200s


    В меню *addons* выбран ли Mgcamd (в строке Camd) , далее надо сделать рестарт системы. Все изменения полностью остаются только после перезагрузки.

  8. #8
    Member
    Регистрация
    20.12.2006
    Сообщений
    62

    Re: Neutrino for 200s

    Вопрос? Есть ли у кого описание на русском про yWeb - это приложение позволяет настраивать доп. функции для Neutrino. (я нашел описание только на немецком - но я в нем не силен).

  9. #9
    Junior Member
    Регистрация
    26.12.2006
    Сообщений
    19

    Re: Neutrino for 200s

    Господа, а кто-нибудь пробовал запустить на нейтрине оригиналку? Четвёртый
    час уже мучаюсь, уже все идеи и энтузиазм закончились, прошу помощи клуба...

  10. #10
    Member
    Регистрация
    20.12.2006
    Сообщений
    62

    Re: Neutrino for 200s

    Цитата Сообщение от krycek
    Господа, а кто-нибудь пробовал запустить на нейтрине оригиналку? Четвёртый
    час уже мучаюсь, уже все идеи и энтузиазм закончились, прошу помощи клуба...
    если я не ошибаюсь, но в последних Нейтрино отсутствует поддержка CI (т.е. ресивер не может читать карты - а работает на ключах и на шаре.

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •